Please press the power button and check to see whether or not the power indicator LED is illuminated. If the power indicator is not illuminated, it means that the unit is not currently powered on. In the event that the light is not illuminated, follow the “The power indicator light is not illuminated and the unit is without power.” troubleshooting guide to proceed. In the event that the power indicator light is on, we recommend you to cross testing with external monitor, if the external monitor display normally, there will be a high possibility that the laptop monitor is faulty, please contact MSI customer service if it's the case.

When the external monitor has no display either, please follow the “The unit powers on but does not boot.” troubleshooting guide to proceed.


boot no display

* The power indicator light is not illuminated and the unit is without power.

* The unit powers on but does not boot

The power indicator light is not illuminated and the unit is without power

Check to see whether or not the connections of socket, power cord, and power connector are in place and seated correctly.
boot no display

Confirm that the socket on the wall functions properly. Furthermore, check to see if the insulating skin of the power cord is damaged.

The unit powers on but does not boot

Check if there are any auxiliary devices connected to the unit (such as USB devices, SD cards, etc.) In the event that any such devices are connected, please remove them and then test the computer to see if it starts appropriately.
boot no display

Use a paper clip to insert into the battery reset hole at the bottom of the unit.

Note:

1. Some of the model might not have the battery reset hole, please remove the power adapter and the battery (if applicable, differ by model) for 15 seconds and place it back

2. The location of the battery reset hole might differ by the model, please refer to the product manual

3. After performing the reset, please have the battery and power adapter connected to activate the battery, otherwise it will not boot up the PC


boot no display

Note whether or not any hardware alterations have been performed. Hardware alterations include things like changes to RAM, changes to hard drives, changes to wireless components, etc. In the event that you have upgraded the unit, please restore the hardware to its original state. After restoration, test the computer to see if it starts appropriately.

Note:

1. We recommend you to send the product to authorized service point to operate this process to avoid any customer-induced damage issued to a warranty exclusion.

2. When disassembling the upgraded hardware, please power off the PC and disconnect it from the power adapter accordingly.


boot no display